Shop Front  
 
[ Previous Page ] [ Shop Front ] [ Terms & Conds ] [ Search ] [ View Cart ] [ Checkout  ] [ Contact Us ] 

Left tabDog Kennel HeatersRight tab

Dog Kennel Heaters

Shop Front | Animal Grooming Shop |  Dog Kennel Heaters

Wren Standard Kennel and Cattery Heater complete with suspension chain and ceiling hook plate - Click to change size

Wren Standard Kennel and Cattery Heater complete with suspension chain and ceiling hook plate


Price: 58.00 (Including VAT at 20%)

Select element

* Click on image to enlarge.

* Famous Wren foster ray heat lamp for kennels, catteries and whelping.

* Polished aluminium reflector for maximum efficiency.

* Supplied with 2m heat-resistant cable and plug. (Extra cable available - see below)

* Safety guard to protect element from damage.

* 1m Galvanised suspension chain, ceiling mounting hook and screws included - everything you need to get the heater up and running. Firm fixings into ceiling joists must be obtained before suspending heaters. For hollow ceilings, we advise the use of suitable cavity fixings. If in doubt, please consult an electrician or other competent person.

* Full installation and element rating guide available on request.

* Please select element rating required.


Wren Standard Kennel and Cattery Heater - Click to change size

Wren Standard Kennel and Cattery Heater


Price: 54.00 (Including VAT at 20%)

Select element

* Click on image to enlarge.

* Same unit as above, but no chain or mounting hook. For use when ceiling height is restricted.

* Some fixing must be used to support the weight of heater - heater must not be suspended from the flexible cable.

* Supplied with 2m heat-resistant cable and plug. (Extra cable available - see below)

* Full installation and element rating guide available on request.

* Please select element rating required.


Wren Standard Kennel and Cattery Heater spare elements - Click to change size

Wren Standard Kennel and Cattery Heater spare elements

Elements available

* Click on image to enlarge.

* Please select element rating required.

Wren Major Kennel Heater - Click to change size

Wren Major Kennel Heater


Price: 65.00 (Including VAT at 20%)

Select element

* Sorry, due to a problem with acquiring porcelain holders, this item is temporarily unavailable.

* Famous Wren foster ray heat lamp for larger breeds and groups of animals.

* Polished aluminium reflector for maximum efficiency.

* Supplied with 4m heat-resistant cable and plug. (Extra cable available - see below)

* Safety guard to protect element from damage.

* Suspension chain is not included, but may be ordered separately, see below.

* Full installation and element rating guide available on request.

* Please select element rating required.


Wren Major Kennel Heater spare elements - Click to change size

Wren Major Kennel Heater spare elements

Elements available

* Click on image to enlarge.

* Please select element rating required.

Energy Regulator for Kennel and Cattery Heating Installations - Click to change size

Energy Regulator for Kennel and Cattery Heating Installations


Price: 48.76 (Including VAT at 20%)

* Click on image to enlarge.

* This unit allows you to make significant savings on the running costs of your Wren heaters.

* Enables the output of up to 3000W of heaters to be adjusted to allow for changing ambient temperatures and individual installations for maximum efficiency.

* Installation should be carried out by an electrician or other competent person.

RCD socket for protection of Kennel and Cattery heaters - Click to change size

RCD socket for protection of Kennel and Cattery heaters


Price: 14.20 (Including VAT at 20%)

* Click on image to enlarge.

* A 13A plug-in safety socket to protect heaters installed in outbuildings.

* Non-latching. Will need to be manually reset if safety cut-out operates.

Timeguard plug-in Thermostat for automatic control of Kennel and Cattery Heaters - Click to change size

Timeguard plug-in Thermostat for automatic control of Kennel and Cattery Heaters


Price: 36.60 (Including VAT at 20%)

* Click on image to enlarge.

* Switches heaters on and off automatically to pre-set temperatures.

* Control temperature range from 0 to 35 degrees centigrade.

* Rated at 13 Amps (2990W).

Wall-mounting hard wired Thermostat for automatic control of Kennel and Cattery Heaters - Click to change size

Wall-mounting hard wired Thermostat for automatic control of Kennel and Cattery Heaters


Price: 18.50 (Including VAT at 20%)

* Click on image to enlarge.

* Neat wall-mounted thermostat.

* Will switch heaters off when temperature reaches pre-set level.

* Will then switch back on if temperature drops again.

* Rated at 10 Amps (2300W).

* Installation should be carried out by an electrician or other competent person.

Plug-in time switch for regulating operating hours of Kennel and Cattery Heaters - Click to change size

Plug-in time switch for regulating operating hours of Kennel and Cattery Heaters


Price: 14.70 (Including VAT at 20%)

* Click on image to enlarge.

* Switches heaters on and off automatically to pre-set times.

* 96 possible on/off switch settings per day.

* Rated at 13 Amps (2990W).

Dimmer switch for regulating Kennel and Cattery Heaters - Click to change size

Dimmer switch for regulating Kennel and Cattery Heaters


Price: 10.00 (Including VAT at 20%)

* Click on image to enlarge.

* Dimmer switch enables element output to be adjusted to suit different breeds.

* Supplied with a surface-mounted plastic box.

* Rated at 1.7 Amps (400W).

* Installation should be carried out by an electrician or other competent person.

Weatherproof Junction box for connecting larger installations of Kennel and Cattery Heaters - Click to change size

Weatherproof Junction box for connecting larger installations of Kennel and Cattery Heaters


Price: 8.20 (Including VAT at 20%)

* Click on image to enlarge.

* Suitable for safely extending cable runs for larger installations of heaters.

* Surface mounted.

* Rated at 20 Amps (4600W).

* Supplied with 2 weather resistant cable glands.

* Installation should be carried out by an electrician or other competent person.

Suspension chain for securely hanging Kennel and Cattery Heaters - Click to change size

Suspension chain for securely hanging Kennel and Cattery Heaters


Price: 1.70 (Including VAT at 20%)

* Galvanised, No 10 jack chain. 1 metre.

Galvanised hook plate for ceiling mounting of Kennel and Cattery Heaters - Click to change size

Galvanised hook plate for ceiling mounting of Kennel and Cattery Heaters


Price: 5.30 (Including VAT at 20%)

* Click on image to enlarge.

* To be screwed to ceiling to suspend heaters.

* Firm fixings into ceiling joists must be obtained before suspending heaters.

* For hollow ceilings, we advise the use of suitable cavity fixings. If in doubt, please consult an electrician or other competent person.


Additional cable for Kennel and Cattery Heaters - Click to change size

Additional cable for Kennel and Cattery Heaters


Price: 1.70 (Including VAT at 20%)

* We can custom make units to suit your installation requirements.

* Standard unit is supplied fitted with 2m of cable.

* Major unit is supplied with 4m of cable.

* Price shown is for each additional metre of cable, select additional quantity required.

Clips for fixing cable - Click to change size

Clips for fixing cable


Price: 1.20 (Including VAT at 20%)

* Click on image to enlarge.

* Pack of 10 cable clips for securely fixing cable out of reach of dogs.

* Supplied with hardened nails, suitable for fixing to most surfaces.

* Eye protection is advised.


Ties for fixing cable - Click to change size

Ties for fixing cable


Price: 1.20 (Including VAT at 20%)

* Click on image to enlarge.

* Pack of 10 cable ties for securing cable to suspension chain, etc.

* 100mm long x 2.6mm wide.


Cable grommets - Click to change size

Cable grommets


Price: 1.20 (Including VAT at 20%)

* Click on image to enlarge.

* 2 cable grommets to protect heater supply cable when passing through walls or ceilings.

Spare thermo-plastic holder for Standard Kennel and Cattery Heaters - Click to change size

Spare thermo-plastic holder for Standard Kennel and Cattery Heaters


Price: 11.00 (Including VAT at 20%)

* Virtually unbreakable.

* Spare holder for standard unit.

* Maximum rating 250W element.


Spare porcelain holder for Major Kennel Heaters - Click to change size

Spare porcelain holder for Major Kennel Heaters


Price: 14.00 (Including VAT at 20%)

* Sorry, due to a problem with acquiring porcelain holders, this item is temporarily unavailable.

* Spare holder for major unit.

* Maximum rating 400W element.


Shop Front | Animal Grooming Shop |  Dog Kennel Heaters