* Click on image to enlarge. * Basic service kit for Favorita 2 clipper. * Incorporates carbon brushes, gear lever, switch cover and grease. |
 |
* Replacement pair of carbon brushes for current model clippers.
|
 |
* Replacement pair of carbon brushes with springs for pre-1998 models.
|
 |
* If blades stop cutting correctly, check the tip of the gear lever for wear. * Lightly grease individual gear box components only when replacing parts. |
 |
* To reduce play in the gear box, replace the eccentric bush, fitted between gear wheel and gear lever. * Lightly grease individual gear box components only when replacing parts. |
 |
* If clipper stutters when first switched on, it may indicate dirty or corroded switch contacts. * Switch requires soldering. |
 |
* If the switch cover is damaged or split, hair can get inside the switch, and cause an intermittent contact.
|
 |
* If blades wobble on the clipper - check the swallowtail fixings screws are tight. If blades still wobble, swallowtail plate may be worn.
|
 |
* If blades work off the clipper when running, swallowtail lever may be worn.
|
 |
* Fits underneath swallowtail lever to keep blades held tightly to clipper.
|
 |
* If swallowtail screws are damaged, they may not hold swallowtail tightly in place on the clipper, and should be replaced. * Set of 4. |
 |
* Keep the filter clear to prevent clipper overheating in use.
|
 |
* Helps support the cable as it comes out of the clipper, helping to prevent cable faults.
|
 |
* Ensures that the top plate runs back and forth smoothly.
|
 |
* Replacement spring to ensure correct tension on blade.
|
 |
* Replacement screw to ensure correct tension on blade.
|
 |
* Replacement screws to hold pressure plate on to blade.
|
 |