Aesculap Fav 5 spares

* Click on image to enlarge.

* Basic service kit for Favorita 5 clipper.

* Incorporates carbon brushes, gear lever, switch cover and grease.

* Replacement pair of carbon brushes.

* If blades stop cutting correctly, check the tip of the gear lever for wear.

* Lightly grease individual gear box components only when replacing parts.

* To reduce play in the gear box, replace the eccentric bush, fitted between gear wheel and gear lever.

* Lightly grease individual gear box components only when replacing parts.

* If clipper stutters when first switched on, it may indicate dirty or corroded switch contacts.

* Switch requires soldering.

* If the switch cover is damaged or split, hair can get inside the switch, and cause an intermittent contact.

* Hinge should stay open when blades are removed, ready to receive the next one.

* If it shuts too easily, it should be replaced.

* Small black latch fits under the hinge and holds the blades onto the clipper when in use.

* If broken, blades may lift off the clipper in use, so it should be replaced.

* Keep the filter clear to prevent clipper overheating in use.

* Helps support the cable as it comes out of the clipper, helping to prevent cable faults.