Sharpening and Clipper Blade Sharpening Service
Diamond Edge Scissor Sharpening and
Clipper Blade Sharpening Service
Inevitably your scissors and clipper blades will require
sharpening and, for best efficiency and performance, it is important to
keep your tools in peak condition.
The Diamond Edge Scissor Sharpening Service restores the
performance of your scissors and clipper blades. We sharpen scissors and sharpen
clipper blades at our own dedicated workshop in Brighton
using a multi-stage process to ensure that your valuable equipment is restored
to peak performance.
Scissor Sharpening- We will endeavour to sharpen
scissors of all types however, if we feel that sharpening your
scissors may not be worthwhile for any reason, we will contact you for
Stage 1- Strip down & inspect scissors for wear
Stage 2- Hollow grind scissor blades when necessary,
clean joints and re-assemble.
Stage 3- Clean and polish scissors and screw.
Stage 4- Edge and hone the scissor blades.
Stage 5- Add micro-serrations to scissor blades as
Stage 6- Replace worn or missing stoppers. Reset
scissor handles to align tips.
Stage 7 - Polish tips to remove any roughness.
Stage8 - Test for performance and lubricate
as the name suggests,very fine grooves machined into the cutting edges of
your scissors, as can be seen in the picture below. They help to grip the hair
and reduce blade "fatigue" when the cutting edges may begin to become
dull through constant use. Many new scissors are now supplied with one scissor
blade micro-serrated. When scissor sharpening, any existing
serrations are inevitably removed, so should be specified if you wish them to
Visit the Scissor Sharpening Service Ordering page now.
Clipper Blades Sharpening
sharpen clipper blades for most makes and models of clipper but, in the
event of any queries,we will contact you for further instructions.
Identify clipper blade make and size for our reference.
Stage 2- Strip down and
inspect clipper blade for wear and damage.
Stage 3- Clean and polish clipper blade to
remove detritus from between the teeth.
Stage 4- Sharpen clipper blades on German
Clean, oil and re-assemble clipper blade, replacing worn or damaged parts.
Stage 6- Test clipper blade
for cutting performance.
Visit the Clipper Blade Sharpening Service Ordering page.